Composer 2->NWC2 Help   [Contents · What’s New · Commands · Keyboard Shortcuts]

Instrument Change Properties

Instrument properties include:

• Patch Name

  This is a name for the instrument specified by the other fields. This can be anything, but it is helpful if the name describes what sound is expected by the specified properties. This name will also appear in the staff when an instrument change is inserted into the staff notation.

• Predefined Instruments

  You can select from a list of predefined instruments using this button.

• Send Patch

  Select the Send Patch box if you want to select a specific MIDI patch number that will be sent to the MIDI synthesizer. The patch number starts at 0, and goes up to 127 (it is zero based). If you have an external synthesizer that displays patch numbers, these might start at 1 (it is one based), so you might have to subtract one from the number on the display when used here.

  The easiest way to select a patch number is by using the Predefined instruments button. You can then select the instrument by name, rather than number.

  Note: If the current staff is sharing a MIDI channel with another staff, then only one of the staves should send patch number information.

• Bank Select

  MIDI synthesizers will often support a variety of instrument banks, each containing different groups of instrument sounds. Select the Send box to specify a specific bank of sounds. The MSB field specifies the value for MIDI Controller 0, and the LSB field specifies the value for MIDI Controller 32.

  These controller values will then be sent to your synthesizer. Consult your synthesizer manual if you think it supports multiple patch banks and you want to use this feature.

  Note: If the current staff is sharing a MIDI channel with another staff, then only one of the staves should send bank select information.

  options

• Default Dynamic Velocities

  When dynamics are entered on the staff, they are mapped to MIDI note velocities, unless the dynamic overrides these values. The velocity values that are most appropriate for this instrument should be assigned here, so that dynamic changes in the staff will sound as you intend.

• Transposition

  If this instrument is based on a real world instrument, you can use this setting to make the notes play back in the same pitch as the real world instrument. For example, if the staff is notated for a trumpet in Bb, you would enter a value of -2 in this box.

See Also

• Introduction to Property Dialog Boxes
• Edit | Properties Command
• Insert Menu Commands